ALTHY Hydrogen Rich Water Generator Bottle

ALTHY Hydrogen Water Generator

● It is used to produce hydrogen-rich water for health and beauty. Hydrogen-rich water can effectively remove toxic free radicals, prevent cell oxidation, prevent diseases, improve human metabolism, delay senility and improve skin quality.
●Real SPE(Solid Polymer Electrolyte) + PEM(Proton Exchange Membrane) Dual Chamber technology, Korean Titanium with Platinum Coating.
● USA Dupont NAFION - 117 Membrane, It puts only pure H2 into the water, but Oxygen(O2), Ozone(O3) Chlorine(CL2) are separated out. （The N324 membrane will leak water, and the electrolysis is unstable. A lot of experimental data prove that N117 is better.）
● 100% safe to drink, Hydrogen purity reached 99.99%. Oxygen, chlorine and ozone are separated out, and discharged from the bottom waste gas vent device.
● 1800mAh large capacity battery, the number of electrolysis times is two times that of other products.
● How to use：
Press the button once(Display blue light): 3 minutes mode;
Press the button 2 times(Display blue light): 10 minute mode;
Press the button for 3 seconds(Display green light): self cleaning mode;
When the hydrogen water generator is working, Press the button once,it will stop working, and the Light is off.
● Super-high concentration
・ 3-minute mode for 1 time: 900ppb ~ 1200ppb;
・ 10-minute mode for 1 time: 1500ppb ~ 1800ppb;
・ 10 minute mode for 2 time(Use 350ml mineral water bottles): 2000ppb ~ 3000ppb;
Please do not exceed 3 times for 10-minute mode, Because too much air pressure can lead to accidents such as leaks.
● Works with All Potable Water Types--Mineral water, Purified water, Distilled water, RO water, purified water, Cold boiled water, and Warm boiled water (water temperature below 65 degrees).
● Food grade High borosilicate glass.
● 3 ways use design, Can be directly connected to a mineral water bottle, Can also absorb hydrogen at home, portable for travel, work and office.
● Maintenance: Long press the button to open Cleaning mode every 1 week & Clean with citric acid every 2 to 4 weeks.

● Please activate DuPont membrane before use:
Fill the glass with 5/6 of drinking water, start the hydrogen production twice in 10 minutes mode (equivalent to hydrogen production for 20 minutes), then do not open the lid, put it for 8~10 hours, then the DuPont N117 membrane will be activated successfully.
(It is better to activate DuPont membranes with a 350ml mineral water bottle.)
● Why does the new hydrogen water bottle have fewer bubbles?
Since the new hydrogen water bottle has not activated the DUPONT N117 membrane, sometimes it has very few bubbles when producing hydrogen. Then, we need to activate the DUPONT N117 membrane first. Please refer to the previous paragraph for the activation method.